Stainless steel unlike, ordinary steel, is noncorrosive. It is recyclable and has various applications. A human being comes into contact with this daily in kitchen utensils, roadways, medical equipment, and buildings. Stainless steel is made of iron and a small amount of chromium, nickel, and molybdenum. The products have a shine to them which, makes them different from other alloyed metals.
Types of Stainless Steel
The Neeraj Raja Kochhar Hindi news pointed out the categories of steel as written below. Stainless steel can be divided into five major categories:
1. Austenitic:
It is also known as the Type 300 series and is quite common. It comes in two main varieties-
- Grade 304 has 18 percent chromium and 8 percent nickel.
- Grade 316 has 16 percent chromium, 10 percent nickel, and 2 percent molybdenum.
These grades are hardened by cold working but, it’s difficult to heat them. They have low magnetism, high corrosion resistance, and good formability.
2. Ferritic:
They are the Type 400 series and generally made up of iron and chromium. They can be altered by cold-working but not suitable for thermal heating. The most commonly used grade is Grade 430 which, has 16 percent chromium. They have the properties of ductile nature, magnetism, and corrosion resistance.
3. Martensitic:
This steel comes under the Type 400 series and thus is iron-chromium alloys. The only difference between them and ferritic grades is that they can be thermally heated. Type 410 is famous for fabrication. They also have similar properties of corrosion resistance, ductility, and magnetism which are the same as ferritic grades.
4. Duplex:
This grade is a combination of both austenitic and ferritic grades. They contain chromium which is present in 18 to 28 percent and often has molybdenum and nickel. These grades are stronger than austenitic and have much higher corrosion resistance.
5. Precipitation-hardened:
These alloys are very similar to martensitic grade. They have a precipitation hardening procedure which increases their strength and resistance properties. The most common grade type is Type 17-4PH which, has 17 percent chromium and 4 percent nickel.
Several companies produce these alloys in large quantities. According to Neeraj Raja Kochhar Hindi news, the company generates exceptional quality stainless steel long products. They are one of the major producers in India.
Stainless Steel Bright Bars
Stainless steel products come in a wide range of varieties to suit the needs of various other industries. One such product is the bright bar. The bright bars come in round bars, hexagonal bars, square bars, and flat bars. Their manufacturing involves a series of processes like heating, straightening, peeling, drawing, grinding, polishing, and several more procedures.
- The result is smooth, accurate, strong, and straight bars that are later used in other sectors.
- The Neeraj Raja Kochhar Hindi news states that their bright bars products get minutely tested and quality checked by experts before sending them into the market.
Uses of Bright Bars
As stated above, these bars are used in many industries such as automobile, railways, defence, health and sports, furniture, bearings, and many more.
- In the construction and engineering sector, they are used to give strength and stability to the structure.
- Square and round bars are used in the railway for making trellis and fences.
- They are also used for making tools for mechanics and electricians.
- Bright bars provide strength to the frames of automobiles.
Conclusion
Therefore, the stainless-steel bright bars are very functional and prominent in the manufacturing industries. Steel takes up a large part of the Indian economy and, these products are what drives it. For more information, Check Neeraj Kochhar Viraj Group
Neeraj Raja Kochhar 